COLUMBIA
FIREPLACE MANTELS
Get a Quote

Solid Mantel Beams

A solid mantel beam is one piece of wood, usually 6 to 8 inches on a side, cut to the length of your wall and set across the fireplace. Each beam is trimmed to your measurement, with the saw marks left on, and we tell you how dry a beam is before you buy it.

If you know roughly how long and how chunky you want it, send us the numbers with a photo of the fireplace, and we'll match a beam to it.

Common beam sizes

Beam sizes are given as thickness by depth in inches. For a mantel, the first number is usually the height of the face you see, and the second is how far it sticks out from the wall, though either way round works.

  • 4x6 and 4x8. A slim beam for a small fireplace or a low ceiling. Light enough for simple brackets.
  • 6x6. Square and solid looking, a common pick for an average fireplace.
  • 6x8. A common mantel size. Tall enough to read as a timber, deep enough to hold photos and candles.
  • 8x8 and 8x10. Big, heavy beams for tall stone fireplaces, vaulted rooms and walls over 6 feet wide.

Length is up to you. A common starting point is a beam that runs a few inches to a foot past each side of the fireplace opening, but the width of the wall and the surround matter as much as the opening. Our sizing guide shows how to work it out.

Because we saw the beam ourselves, we cut it to your length rather than to a stock size.

Finding the right beam

Beams aren't made to a catalog. Each one is squared from a single log, so the sizes and woods we can offer change from month to month. Flexibility gets you a beam sooner: if an inch less depth or a different oak would work, say so. Send the size, the wood and your deadline, and we'll answer with what fits now or when one could be cut.

Rough-sawn, hewn-look or surfaced

Rough-sawn is the beam as it comes off the saw, with the saw marks across the faces and slightly fuzzy grain. The pattern of the marks depends on the saw. A band saw leaves fine, evenly spaced straight lines. A circle saw leaves curved arcs that sweep across the face.

Hewn-look imitates a beam squared by hand with an axe or an adze, with shallow scoops and facets instead of saw marks. It suits farmhouse and cabin rooms.

Surfaced means the faces are planed smooth. The color and grain show clearly, and the beam takes on a cleaner, more finished look.

Rough-sawn is the classic beam-mantel surface. If you're on the fence, brushing a rough beam with a stiff nylon or brass brush takes off the loose fibers and keeps the marks. Our guide on finishing a rough-sawn mantel has the details.

Checks and cracks: what's normal in a beam

Nearly every solid beam has checks: narrow cracks along the grain on the faces and the ends. They open as the outside of the beam dries and shrinks faster than the inside. A beam cut with the center of the tree inside it will almost always check, and more so over a fireplace, where the air is warm and dry.

A surface check in a mantel is cosmetic. What to watch for is a crack that runs all the way through, or a split that starts at a bracket hole. Those usually mean the beam was hung green or held too tightly to move.

More on why checks form and how to limit them: Will a solid wood mantel crack?

Weight by size and species

Solid beams are heavy, and the weight decides how a mantel gets mounted. The table shows approximate weight per foot of length at 12% moisture content, about what air-dried wood settles at in Missouri. The weights are calculated from Wood Handbook specific gravity values (USDA Forest Products Laboratory, chapter 5), for full rough-sawn sizes.

Species lb per cu ft 4x6 6x6 6x8 8x8 8x10
Black walnut 38 6 10 13 17 21
White oak 48 8 12 16 21 26
Northern red oak 44 7 11 15 20 24
Eastern red cedar 33 5 8 11 15 18
Sycamore 34 6 9 11 15 19
White ash 42 7 10 14 19 23

Pounds per linear foot, rounded. Real beams vary with the tree.

To get the weight of your mantel, multiply by the length in feet. A 6-foot white oak 8x8 comes to about 127 pounds (6 × 21.1). A 6-foot walnut 6x8 is about 77 pounds (6 × 12.8).

Green wood is much heavier. Using the Wood Handbook's average green moisture content for heartwood, a green walnut 6x8 weighs about 20 pounds a foot instead of 13. Eastern red cedar is the exception: it holds little water, so a green cedar beam weighs only slightly more than a dry one.

New-sawn vs reclaimed barn beams

A reclaimed beam comes out of an old barn or building. It's been drying for decades, so it has already done most of its shrinking and checking, and it carries peg holes, mortises and weathering that a new beam can't. It can also hide nails and bolts, and it is sold as found, so you get the size the barn had.

A new-sawn beam is cut fresh from a log, to the size and length you want, with clean faces and a known species. The trade-off is moisture: it will keep drying in your house. Our guide Reclaimed barn beam vs new-sawn beam compares them in detail.

What a beam costs

A rough-sawn beam sells for about $15 to $40 per linear foot around the US, and a surfaced, finished one for $40 to $100 or more (national ranges, not our prices). The cross-section, the species and the length all push the price up or down: an 8x10 holds two-thirds more wood than a 6x8, and walnut costs more than oak or cedar.

Our pricing page has the full table and a price estimator. When you're ready to hang it, see mounting a solid wood mantel.

Get a Mantel Quote

Send us the length, the size of beam you're picturing and a photo of the fireplace, and we'll reply with a beam that fits and its price.

Get a Mantel Quote

A FOCAL POINT THAT FEELS LIKE HOME

Make the fireplace
your own.

Send the wall measurements and a photo. We’ll quote a mantel for your room.

Get a Quote